LED Fog Lamp Compatible with Vehicle For Cars Compatible with Imported 2 Pieces Left and Legendary Series LED Headlight H7 White 8400lm fcl. Bulb,

FCL's strongest lumen h8 h9 h11 h16 hb3 hb4 h1 h3 h3c h7 led headlight legendary series. A vehicle inspection compatible LED bulb that is 10 times brighter than a halogen bulb and more bright than HID. Not only is it bright, but the lumen count hardly decreases from the time it is turned on until it stabilizes, and it maintains its maximum brightness over time. It can be attached to low beams, high beams, and fog lamps, and is available in four colors: yellow, white, lime yellow, and light bulb color (halogen color/warm color). Can be exchanged for many cars such as the popular Hiace 200 series, Serena C27, 30 Prius and Aqua. Make your car life brighter and safer with car parts that come with a 1-year warranty and full support. [Feature 1. Stays bright even after time] FCL's LEDs hardly lose their brightness even after they are turned on and after they stabilize. We have developed an LED that does not dim significantly after a few minutes of being turned on, but can maintain a bright state. Compared to the genuine light, the difference is more than 10 times (compared to the genuine bulb with H16 shape. The value of H16 is our measured value). The number of lumens of our products is measured by a third-party organization in Japan. The number of lumens is not the number of lumens immediately after the car lights are turned on, when they shine brightest, but the number of lumens is set to the brightness after 5 minutes when the number of lumens has stabilized, which is the brightness that actually illuminates the road etc. I measured the lights of other companies with similar actual lumens, and the brightness of the other companies' products was 20% lower than immediately after they were turned on. FCL has been able to maintain brightness at a high level even after stabilization. All LED products are bright immediately after they are turned on, and the brightness decreases within a few minutes before stabilizing. Due to the specifications of the LED, it is not possible to maintain the same brightness immediately after lighting. Therefore, please be careful when writing the number of lumens. [Feature 2. Same light emitting point as genuine halogen] By placing the chips close together, we have reproduced the almost 360° luminescence that is the same as genuine halogen. Not only is it bright, but by using the same light emitting point as the original, there are no blind spots, and the brightness provides the best performance. The position of the light emitting point and pedestal are designed to be the same as the original, which solves the glare and disturbance of cut lines that occur when the light is too bright, and prevents pedestrians and oncoming vehicles from being dazzled. [Feature 3. High heat dissipation and long life] Heat dissipation is important for high lumen LEDs. Bright = A large amount of heat is generated in the chip, so if heat dissipation is poor, the brightness will decrease over time and the product life will be significantly shortened. Therefore, FCL is designed with careful consideration from materials to design in order to obtain the maximum cooling effect. The efficient heat dissipation structure, including cooling fins, heat pipe structure, aluminum alloy, and silent fan, prevents premature failure due to heat and maintains brightness even after lighting. [Feature 4. Waterproof for peace of mind even in bad weather] IP66 certified waterproof and dustproof, so you can use it for a long time with peace of mind even in bad weather such as rain and snow. [Number of lumens] White: 4200lm, yellow: 4500lm, lime yellow: 5000lm, bulb color: 3800lm [Power consumption] 45W [Polarity] Available [Color] White/white, yellow/yellow, lime yellow/green yellow, bulb color/halogen color/warm color 1 year (FCL. can be used as many times as you like during the period) [Heat dissipation performance] Silent design cooling fin [Waterproof and dustproof] IP66 [Set contents] Simple instructions, bulbs x 2, tie wraps x 6 [Use the fog lights correctly] Driving with just the fog lights on, using them on sunny days/always on, using them without adjusting the optical axis/setting the optical axis upwards, etc. Please note that these usages are not allowed! [1 year warranty "as many times as you like" & vehicle inspection compatible]...This product meets domestic vehicle inspection standards including color, cut lines, etc. [Product design compatible with vehicle inspection]. Furthermore, at FCL, we guarantee that all parts are covered by the warranty during the warranty period (1 year), and we will perform replacements and inspections as many times as necessary during the warranty period to ensure your peace of mind. At our company, we conduct inspections such as the cut line and number of lumens that meet vehicle inspection standards by a domestic specialized organization, and we also check to see if the color matches the vehicle inspection standards. *Lime yellow is a yellow that meets vehicle inspection standards, but in rare cases it may not be compatible with vehicle inspection at the discretion of the inspector. Regarding warranty support, there are cases where other companies' long-term warranties limit the number of replacements (only once) during the warranty period, and there are cases where only some parts of a product set have a short warranty period, but at our company, even if a problem occurs for the second time during the warranty period, we will provide warranty support [as many times as you like]. If there is a problem with the product, we will also cover the [round-trip shipping costs] and support will be provided by our professional staff in Japan. In the unlikely event of a malfunction or problem, please contact our customer support directly. [Notes on this product] - Cannot be installed on vehicles that require a valve adapter. - Polarized to increase durability. If it doesn't light up, try plugging it in the other way. ・The fin part gets hot. To avoid interfering with the heat exhaust effect of the valve or interfering with the fan, please install it so that the original wiring or tie wraps do not come into contact with it. ・Depending on the A (ampere) number of the genuine fuse, the fuse may blow out. If less than 15A is used, please replace it with a 15A fuse or install a relay harness (sold separately). -H1 H3 etc. may require drilling holes in the waterproof cover of the camera back. - Lime yellow is a yellow that meets vehicle inspection standards, but in rare cases it may not be compatible with vehicle inspection at the discretion of the inspector. ・This product is equipped with waterproof rubber to improve its waterproofness, but in rare cases it may break after being fixed. In that case, please replace it with the included spare rubber. *It may not be included depending on the time of purchase. ・[Imported cars only] → Depending on the car, the product alone may not be able to avoid the bulb burnout warning light, or the fuse may blow. In that case, a stable power supply is required separately. Please prepare a relay harness and a canceller. ・[Imported cars only] → Depending on the car, it may flash temporarily in response to the current when the bulb burnout warning function is activated, such as when starting the engine. This is due to the specifications of the car and is not a product defect.