LED sensor light, outdoor 100V, outlet type, IP65 waterproof, 3 modes (motion sensor, D2D, constant light), 3000 lumens brightness, 2 levels of

[After-Sales Support] - We offer technical support, product replacement, and more. Our lights are thoroughly tested before shipping, but despite our best efforts, lights may be damaged during shipping, or some parts may be missing or damaged due to being returned. For after-sales support, please contact us with pictures + text/video + text. We will reply within 24 hours (this product comes with a one-year warranty). [Features] - Power Supply: AC 100V 50/60Hz. Power Consumption: Approximately 24W. 3 Color Temperature Settings: 3000K/4000K/5000K. 2 Dimming Levels: Low/High. Waterproof Rating: IP65. Light Duration: Fixed settings available for 1, 5, or 12 minutes. Operating Temperature Range: -20°C to +50°C. Light Housing: Plastic. Power Cord Length: Approximately 3m. [Supports 4 Operation Modes] - TEST Mode: In this mode, you can adjust the sensitivity to find the ideal trigger range. Night Motion Detection Mode: In this mode, the light will only turn on when motion is detected at night. D2D Mode: In this mode, the light will automatically turn on at dusk and turn off at dawn. Nighttime On Mode: Manually set the light to always be on at night. [Sensor Detection Distance and Angle] - Sensitivity is continuously adjustable and can be adjusted as needed. Sensitivity (): Approximately 3 meters, Sensitivity (): Approximately 9 meters. The provided detection distances are for reference only. Detection angle from 0m to 2m: Approximately 180°. Detection angle from 2m to 4m: Approximately 140°. Detection angle from 4m to 5.5m: Approximately 110°. Detection angle from 5.5m to 7m: Approximately 90°. Detection angle from 7m to 9m: Approximately 60°. [Sensor Detection Method] - Infrared sensing principle: Detects changes in heat in the environment (infrared rays emitted by humans and animals). The sensor is activated when a heat source moves or changes within the detection area. Important Notes: (1) To prevent malfunction, do not install the sensor near heat sources such as air conditioners, vents, or exhaust vents. (2) Avoid installing the sensor in locations with strong reflected light, as this may interfere with the sensor's normal operation. (3) When installing the sensor, ensure there is an appropriate distance between the sensor and the tree. Branches swaying in the wind may cause the sensor to malfunction. (4) Infrared rays cannot pass through glass or other objects, so make sure there are no such obstacles within the detection area. (5) The sensor is sensitive to lateral movement and is less sensitive to objects approaching in a straight line. [Mounting Instructions] - There are four mounting holes on the back of this product, and you can install it without drilling holes using an L-shaped mounting clamp set or cable ties/stainless steel bands. You can also install it using screws and drilling holes. Recommended mounting height: 1.8-2.5 meters, optimal mounting height: 2 meters. [Accessories] - 1 x Security Light, 1 x Stainless Steel Screw, 1 x Screw Hole Cap, 1 x Plastic Expansion Tube, 1 x Mounting Clamp Set, 1 x Japanese Instruction Manual.