12V Bilge Pump Submersible 7000RPM 200W Universal Electric Drain Pump for Yachts Fishing Boats

Feature: 1. Selected Material: The casing of bilge pump is made of plastic, impact resistant, with built in copper motor, which has excellent conductivity. 2. Large Water Flow: The bilge pump has large flow, low power consumption and high lift, which is suitable for large ships to pump seawater. 3. Advantages: Bilge pump, small size, high efficiency, 7000RPM speed, completely submersible, supports silent and vibration less operation. 4. Multi Purpose: Electric pump can be used as water pump, bilge pump and drain pump for boats, yachts, fishing boats and so on. 5. With Assembly Instruction: The kit contains detailed assembly instructions, so there is no need to worry about the use after purchase. Specification: Item Type: Bilge Pump Material: Plastic+Copper Motor Rated Voltage: 12V Power: 200W Current: 17A Fuse: 22A Lift: 8.5M Diameter: Approx. 2.5cm 0.98in Wire Length: 3.3M Rotating Speed: 7000 Rpm Application: Used as water pump, bilge pump and drainage pump for boats, yachts, fishing boats, etc. Wiring: Brown wire is connected to positive pole, black wire is connected to negative pole Installation: 1. Press the locking tabs on both sides of the pump and remove the filter from the bottom of the pump. 2. Determine the proper installation position of the pump 3. Place the filter so that the pump outlet nozzle is in the correct position to connect the outlet hose 4. Install the filter 5. Install the pump on the filter, snap the two lock tabs into place 6. Connect the water outlet hose to the water outlet nozzle of the pump (flexible hose is recommended) 7. Installation accessories 8. Wiring: to prevent electrolysis of wiring, all wire ends and terminals must be above the highest water level and fixed with insulating nails or cable ties. Package List: 1 x Bilge Pump1 x Connector1 x Manual Note: When the ship is stationary, the installation must allow the outlet hose of the bilge pump to be completely drained. The outlet hose must be kept horizontal or continuously upward to eliminate all puddlesIf you are replacing an old bilge pump with a smaller Diameter outlet hose, you may need to use an adapter to connect to the larger outlet size on the pump.Using smaller hoses to limit the flow of the pump will not damage the pump, but will reduce the rated flow.