Feature:
1. The working time of ultrasonic can be freely adjusted within 1 99 minutes, maximum heating temperature 80 celsius , suitable for different application scenarios.
2. Built in safe and efficient transducer to improve conversion efficiency and safety performance.
3. The shell is made of high quality fingerprint proof stainless steel embossing board, which is beautiful, anti rust and sturdy.
4. The cleaning tank is stamped with premium stainless steel, without any welds for better waterproof performance.
5. Adopt high quality components, featuring high ultrasonic efficiency, strong power, good cleaning effect.
Specification:
Item Type: Ultrasonic Cleaner
Model: 6130HTD
Cleaning Tank Capacity: 15L
Cleaning Tank Size: Approx 33x30x15cm 12.99x11.81x5.91in
Dimension: Approx 36x33x33cm 14.17x12.99x12.99in
Ultrasonic Frequency: 40KHz
Ultrasonic Power: 360W
Heating Power: 400W
Number of Vibration Heads: 6
Working Time Range: 1 99min
Temperature Range: 0 80 celsius
Liner Material: SUS304
Shell Material: Stainless Steel
Net Basket: Equipped
Noise Reduction Lid: EquippedOperation process:
1. After unpacking, shake the machine slightly, listen to whether there is any noise in the case, and confirm whether the parts are loose;
2. Place the machine in a ventilated and dry place to ensure that the machine is in a horizontal position;
3. Add an appropriate amount of cleaning fluid as required for cleaning (2 3 tank depth<L<3 4 tank depth);
4. Connect the power plug correctly: make sure that the power supply has a reliable grounding wire!
5. Adjust the working time of ultrasonic:
Mechanical timing type: After turning on the power, turn the right timer knob clockwise until the required cleaning time is reached on the time scale of 0 20 minutes. The indicator light is on, and the sound of ZIZI is emitted, indicating that the ultrasound starts to run
Digital type: After the power is turned on, the digital screen on the right displays 0700 , which means that the default setting time is 7 minutes 00 seconds. Each time you press the TIME+ or TIME key, the time will increase or decrease by 1 minute; after the time is set by the key, press the ON OFF key once, the ultrasound starts to work, and the digital timer counts down. The machine s time setting has a memory function. After the set time is reached, press ON OFF repeatedly, and the machine will continue to work according to the previous set time.
6. Adjust the working temperature (select heating if necessary; mechanical type has no heating function):
Mechanical type: turn the temperature controller on the left clockwise until the required temperature (above 20 degrees is fine), the heating indicator light is on, and the heating element starts to work
Digital type: The left digital screen displays 50 and the actual temperature XX , indicating that the default set temperature is 50 degrees. Each time you press the TEMP+ or TMEP key, the temperature will be adjusted up or down by 1 degrees C; after the operating temperature is set by the key, press the ON OFF key once, and the heating element will start to work. (The heating function can be switched on and off freely is another feature of this machine)
7. Shut down after finishing the work:
After the cleaning work is completed, if you do not need to operate again, you should first turn off the heating element and disconnect the power; after the cleaning fluid has cooled to normal temperature, pour off the cleaning fluid, and wipe the inner tank and shell of the machine. The used machine should be left dry In a ventilated place, avoid moisture in the control circuit.
FAQ:
Q: What is an ultrasonic cleaner?
A: Ultrasonic cleaning is based on the cavitation effect caused by high frequency ultrasonic wave vibration signal in the fluid. Microscopic bubbles are formed, and then implode violently causing the cavitation which create an intense scrubbing action on the surface of the item being cleaned. The bubbles are small enough to penetrate microscopic crevices, cleaning them thoroughly and consistently.
Q: Which products can this ultrasonic cleaner clean?
A: Many products can be cleaned. Common such as glasses, necklace, earring, bracelet, electronic, watch, false tooth, printer ink head, shaver head, nib, coin, badge, nipple, etc.
Q: Which detergents can be properly added for better cleaning during cleaning?
A: You can add cleaning liquid or abluent, such as: cleanser essence, soapy water, disinfectant, etc. However, do not add acid or alkaline solution to the machine to prevent ABS from corrosion and damage..
Package List:
1 x Ultrasonic Cleaner1 x English Manual1 x Power Cord
Note:
1. When the ultrasonic wave is in normal operation, the uniform resonance sound of the ultrasonic wave and the tank body should be heard, and the surface of the cleaning liquid is not excited, only the ripple caused by the hole blasting. If there is intermittent oscillation, please add a little cleaning liquid or discharge a little cleaning liquid. Eliminating the oscillations helps to clean the objects;2. Under the premise of ensuring that the cleaning objects are clean, work as intermittently as possible and not heat, because the heating and long time ultrasonic work will increase the temperature inside the chassis, and it is easy to accelerate the aging of the electronic device;3. Never use flammable and corrosive detergents;4. When there is no proper amount of cleaning liquid in the cleaning tank, the heating and ultrasonic wave must not be turned on;5. Prevent the cleaning fluid and water from entering the chassis, soaking the circuit board and the vibrator, which will burn the electronic components;6. If any foreign object falls into the bottom of the tank, it should be taken out immediately (not directly taken by hand to prevent injury);7. When changing liquid or draining, it should be carried out in the tank at normal temperature, and be sure to turn off the power and unplug the power cord! (After cleaning, do not leave liquid in the cleaning tank!)8. Keep the appearance of the machine clean when cleaning; clean the machine after stopping, keep the whole machine clean and dry.