[Amon Online Exclusive] LED Footlight Kit for Front Seats (White, WK767) for Note/Note e-POWER (E12/NE12)

*Please Read Before Purchasing* ▼This kit cannot be installed on vehicles equipped with dealer options or aftermarket products with interior lighting functions, such as rear seat monitors or air purifier room lamps, as they may not function properly. ▼This kit is not compatible with vehicles equipped with factory LED room lamps. ▼If using LEDs other than those included in this kit, please be aware of the available power. ▼This kit is only compatible with vehicles equipped with an idle stop system. ▼For vehicles without an idle stop system, the fuse box arrangement has not been confirmed, so the installation may differ from the instructions and video included with the kit. ▼For vehicles equipped with an idle stop system, the LED may flicker when the engine starts after the system is activated. This does not indicate damage to the unit. ▼This kit cannot be installed on vehicles with an autopilot function.

[Product Features] ◆The footlights gently turn on and off in conjunction with door opening and closing. (The gently turning function can be turned on or off.) ◆The footlights turn on in conjunction with engine start. - Two brightness settings (100%/30%). ◆Footlights turn on when the parking lights are turned on. - Four brightness settings (100%, 30%, 10%, 3%). ◆Event Mode - Two flashing patterns (slow flashing/fast flashing) ◆Battery load reduction function (auto-off) - If a door is left open for more than 10 minutes, the lights will automatically turn off to reduce battery load. - Does not operate in event mode. - Event mode will automatically switch to normal mode after up to one hour of continuous use.

[Kit Contents] - LED Control Unit x 1 - Unit Harness x 1 - Double-Sided Tape x 1 - Dedicated 3-LED Flat Panel x 2 - Extension Harness x 1 - LED Mounting Brackets x 2 - Fused Power Supply x 2 - Connector Harness x 2 - Panel Remover x 1 - Wiring Guide x 1 - Wiring Bands x 6 - Torx Wrench x 1

[Product Specifications] ■ LED Control Unit - For 12V DC vehicles only - Output Current: 2A or less ■ Dedicated 3-LED Flat LED - For 12V DC vehicles only - Current consumption: 60mA per LED - Cord: 0.2sq (equivalent) - 1m (length) ■ Dedicated Harness - Black/White - Black (thin wire): 0.2sq (equivalent) - 50cm (length) - Yellow: 0.5sq (equivalent) - 50cm (length) - Red: 0.5sq (equivalent) - 50cm (length) - Black: 0.5sq (equivalent) - 1m (length) - Blue: 0.5sq (equivalent) - 50cm (length) - Orange: 0.5sq (equivalent) - 50cm (length) Lens cover specifications will be changed gradually. (The LED itself remains unchanged.) Compatible Vehicles: Nissan Note/Note e-POWER (E12/NE12) (September 2012 - November 2020) Outperforming OEM functionality and practicality, these LED lights add color to a variety of scenes. No special tools required. (Purchased exclusively) DIY footlights that can be installed by following the vehicle-specific installation video. LEDs turn on and off softly when connected to the door (interior lamp).