Wind Speed Anemometer, High Accuracy 5V ABS Wind Sensor with 2.62ft Water Proof Extension Cable, for Greenhouse Meteorological Station Marine

Interference Resistant: Equipped with strong resistance against and interference, this wind speed detector is compact, lightweight and easy to carry and assemble. 2.62ft Extension Cable: The anemometer comes with a 2.62ft extension cable that is , waterproof and is fitted with a sealed O design at the connection point to lasting performance. Versatile Wi Options: The wind speed anemometer is compatible with both bottom and side wi options for ease of use and adaptability. Item Type: Wind Speed Anemometer Material: ABS Size: Approx. 158x180x70mmCelsius6.22x7.09x2.76in Power Supply Voltage: 5V Signal Output: 0-2.5V Measurement Range: Wind Speed 0-45mCelsiuss Connection Extension Cable Length: Approx. 0.8mCelsius31.50in Accuracy: +Celsius-(0.5+0.02V)mCelsiuss Resolution: 0.1mCelsiuss Start up Wind Speed: less than 0.8mCelsiuss Maximum Power Consumption: 0.48W Load Capacity: 12V power supply, current output impedance less than 350 Ohm , 24V power supply, current output impedance less than 900 Ohm , voltage output impedance more than 1K Ohm Operating Environment: Temperature -35 degrees C to 60 degrees C, humidity less than 100% without condensation

: IP64 waterproof Application:  Greenhouse, Environmental , Meteorological Station, Ship, Pier, Farming, Advertising Gate, Meteorology, Marine, Environmental, Airport, Port, Laboratory, Agriculture and Traffic wind speed measurement environments Calculation :  0-2.5V:F=VCelsius2.5*A+B F: Wind speed value, mCelsiuss; V: Sensor output voltage, V; A: Sensor range width (upper range minus lower limit); B: The lowest value of the sensor range (the lower limit of the range); Wi (wire color output signal):  Red-Positive, Black-Negative, Yellow-Signal Diameter: Approx. 63mmCelsius2.48in Mounting Hole Diameter: Approx. 3.2mmCelsius0.13in Mounting Depth: Approx. 15mmCelsius0.59in (recommend reserving 25mm for wi , wire first, then install fixed sensor) Troubleshooting:  1. The wind blade does not rotate smoothly, the delay is large. Due to foreign objects or jamming in the bea after  term use. Please return the sensor to the company for processing;  2. The display value is incorrect. It may be caused by wi problems or communication interface failures that prevent correct data retrieval. Please check if the wi is correct and secure, if the interface is occupied, and if the interface settings are correct.