Extender Converter HDMI to LAN RJ45 over twisted pair 30M

Advanced Extender HDMI to RJ45 LAN Extender 30m HDMI to RJ45 Extender enables HDMI signal transmission up to 30 meters using a standard Cat 5e/6 network cable. Thanks to this solution, you can easily and effectively transmit video and audio signals from one device to another over a longer distance, without losing quality. The devices do not require additional power supply - they are powered by PoE. Extender HDMI extender 30m over twisted pair The HDMI extender enables the transmission of HDMI signals in 3D resolution via a single pair of UTP cables of the following categories: 5 or 6, enabling transmission distances of up to 30 meters. Using a UTP cable is more cost-effective (it is significantly cheaper than HDMI) and allows for easier installation thanks to greater resistance to mechanical damage at bends. The set consists of a transmitter (Sender) and a receiver (Receiver), both connected via HDMI cables, which allows users to save both time and installation costs. Technical Specifications: Inputs: HDMI (TX) and RJ45 (RX) Outputs: RJ45 (TX) and HDMI (RX) Power Supply: via HDMI and PoE Maximum UTP Cable Length: 30 meters (Category 6) Supported Resolutions: 3840P (4K), 1920P (FULL HD), 720P (HD) and lower Maximum HDMI Cable Length: 10 meters Compatibility: HDMI 2.0 and HDCP 2.2 Installation: Plug and Play, no drivers required Dimensions: 6 x 2.5 x 2 cm Housing material: plastic Connection Instructions: Transmitter (TX): Connect directly to the device from which you want to send the signal, e.g. computer, set-top box, or console. It is recommended that the HDMI cable be a maximum of 10 meters long. UTP cable: Connect the transmitter (TX) to the receiver (RX) using a UTP cable (category 5 or 6). The maximum cable length is 30 meters; For lengths over 20 meters, a Category 6 cable is recommended. Receiver (RX): Connect directly to a display device, e.g., projector, TV, monitor.