TONE Ratchet Digital Torque Wrench 60 T3DT60H, 9.5mm (3/8") Drive, Black, N m

We offer a wide variety of products, and the following precautions apply to some of them. Please note that they are listed for all products. 【Voltage Compatibility】Designed for Japanese voltage (90-110V). Using with a different voltage may cause malfunction. 【Plug Type】Japanese plugs (A or B type). Use a conversion adapter if needed. 【Transformers & Adapters】Transformers adjust voltage; adapters only change plug shape. Using an adapter without a transformer may damage the product. 【Liability】We are not responsible for damages caused by improper use, such as using the product without a transformer. Drive size dr.A (mm): 9.5 Specifications 1: Capacity Range (Minimum to Maximum) (N・m) 12 to 60 / Minimum Display (N・m) 0.3 / Number of Display Digits (N・m) 0.01 / Display Unit N・m / Number of Teeth 48 / Torque Accuracy ±3% Specification 2: Operating temperature range -10℃ to 60℃ / Storage temperature range -20℃ to 70℃ / Humidity 90%RH or less Specification 3: Battery used: 2 x AAA batteries / Battery life: Approximately 48 hours of continuous operation (with LED OFF), approximately 6 months in standby mode (with LED OFF) *Battery life may vary depending on usage and storage environment. The power will automatically turn off when the battery level is low. Specification 4: Tightening status notification function, pass/fail judgment function, data storage/transfer function, measurement mode switching function, bidirectional measurement support, calibration certificate included, sensor-equipped grip Dimensions: Overall length 229mm, weight 0.45kg (excluding battery weight) Accessories: Communication software CD x 1, USB communication cable x 1, AAA batteries x 2, Calibration certificate (with traceability diagram) x 1, Instruction manual x 1, Plastic case x 1 Calibration certificate validity period: If unused, it is valid for one year from the calibration date on the calibration certificate. If use begins less than one year from the calibration date on the calibration certificate, it is valid for one year from the start of use or up to 10,000 tightening cycles.