19Pcs/Set T-bar Pulling T Dent Remover Kit Mechanical Metal Slide Dent Repair Tool Hand Tools Kit

Label:Yes Quantity: 19Pcs/Set Brand new and high quality Material: Metal Size: as shown Color: As the picture show

How to use: 1. Clean the dent with a clean wet cloth; 2. Mount the glue stick into the glue torch, pull the trigger to let the glue stick enter into the glue torch, connect the power source and preheat for 5 minutes; 3. Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is); 4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue); 5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter); 6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent; 7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen; 8. Clean the repaired place with a clean wet cloth.

Notice: 1. The real color of the item may be slightly different from the pictures shown on the website caused by many factors such as brightness of your monitor and light brightness. 2. Please allow slight manual measurement deviation for the data. Thank for your understanding. 3. 1cm=0.39''.

Package Included: 1x Car Dent Puller Tools 18x Blue Glue Tabs/ Lifter Glue Puller