Good luck with your favorite purchasesName: mud baby elephant leg bottle injection mold
Material: environmental protection gypsum
Color: white
Mold size: 12x13.5x14cm
Plain embryo size: 7.5x10cm
Weight: about 2kg after drying, for reference only. Due to different dry and humidity, the weight is different
Description: Refined from high-quality gypsum, it has good water absorption, strong and durable. Grouting molding is simple to use. Note that the dryness and wetness of each batch of goods are different, so the weight is not necessarily the same. Please dry it after receiving the goods!
1. The mold can be used only after it is dried in the sun or air (if it is dried in a kiln, the temperature is not
Can exceed 80 degrees) wet mold will affect its water absorption.
2. After demoulding, the mud body must be fired at high temperature before it can become ceramic
About 10-15%.
3. After use, the mold should be cleaned and stored in a clean, ventilated and dry place.
4. Because it is made of gypsum and it is difficult to avoid bumping on the way of express delivery, so there are bumps and pits in the mold
Usually, after mold opening, the green body still needs to be leveled with grouting joints, so some small pits are not
Please understand the impact on normal use, and mind taking pictures carefully!
Suitable for mass production of ceramic bars, schools and ceramic lovers
Note that our gypsum mold is only applicable to the injection molding of clay slurry, once it is used for other purposes
, at your own risk. Once the mold is used, it will seriously affect the secondary sales!
Because the mold is made of gypsum, it is easy to absorb water, so it cannot be sealed and packaged
It is normal to store in a dry environment because its material is fragile and there are bruises on the outside of many moulds
If the inside of the mold is intact, it will not affect the use. Those who mind should be careful!
No-delivery refund
